Delve into the detailed description and analysis of mechanical guest room plans, with a focus on the vertical conditioning unit, supply and return systems among other key features. Gain insights into various elements like the passive ventilation system, thermostat mounting, and the fan coil unit in a standard guest room design.
Key Insights
- The guest room plans are organized by suite type, with detailed indications of air supply and return systems, thermostat locations, and structural grids. Each room features a vertical conditioning unit, which conditions the air and vents it through a shaft to the roof.
- The air supply in these rooms comes from the hallway and is controlled by a passive ventilation system. There are specific notes about the duct as well as the cubic feet per minute of air supply and return.
- The thermostat is standardly mounted at 48 inches above the finish floor. Each room also has its own fan coil unit, which pushes air into the seating and sleeping areas. The plans have been updated with the addition of structural grids in Revision 4 of the documents.
This lesson is a preview from our Construction Professional Course Online (includes software). Enroll in this course for detailed lessons, live instructor support, and project-based training.
Let's spend a few minutes reviewing the mechanical guest room plans. As before, the plans are by suite type. So let's zoom into here.
You see we have general notes here, and we have key notes here. Here is the vertical air conditioning unit that we've seen before. There's supply and return.
On this side, the arrows in and out. The cubic feet per minute are specified. Air coming in from the hallway here.
And then this is a shaft that goes to the roof. And so what's happening is that air would go through the wall and vent out through the roof. This unit here is for the double queen.
Again, air comes in from the hallway. The passive ventilation system. We have notes about the duct.
Learn Blueprint Reading
- Nationally accredited
- Create your own portfolio
- Free student software
- Learn at your convenience
- Authorized Autodesk training center
The vertical system. Again, you can see the supply is in the living room. There's a return in the living room and a return in the bedroom with the cubic feet per minute.
Here's the thermostat that's mounted, 48 inches above finish floor. And this is a standard mounting height. And here's the last of the units where this has its own fan coil unit.
So it pushes air into the seating area and also into the sleeping area and the passive ventilation in the bathroom. They have included the structural grids, and this is probably something new that's been added with Revision 4 to the documents. So again, please spend some time looking at the drawing, and I will talk to you in our next video.
