Discover the process of creating a manual drawing set using design workspaces. Learn how to adjust orientations, scales, styles, and how to effectively add and modify tables.
Key Insights
- The article provides a step-by-step procedure to create a manual drawing set in the design workspace, starting from opening the workspace to creating a new drawing.
- Several settings, like the sheet size and orientation, are taken into consideration for the creation of an effective drawing. This includes adjusting the drawing's scale and style, and ensuring the orientation is set to 'northeast isometric'.
- The article also showcases how to add a table to the drawing, modify its properties, and add information to the title block. This includes customizing the document type and drawing number in the title block.
Note: These materials offer prospective students a preview of how our classes are structured. Students enrolled in this course will receive access to the full set of materials, including video lectures, project-based assignments, and instructor feedback.
Now let's create our final drawing set. We'll begin by opening the design workspace. From here we want to look at the top file menu.
Pull that down and find new drawing. We want to select from design. From here we want to create a manual drawing.
All the defaults should be fine but double check the sheet size is A3 and orientation is landscape. Go ahead and click ok. Fusion has to think for a moment and it will open up a blank drawing for us.
If we move our mouse around we'll notice that we do have a view ready to be placed but don't click yet. Instead take a look at the drawing view options. We want to change the orientation first.
We'll drop that down and change it to NE which is northeast isometric. Now we want to adjust our scale. There is a dot dot to the right of the scale.
We'll click that and let's try one to four. Move our mouse away and that looks pretty good. We also want to change the style.
We want to make sure it says shaded. With that everything should be ok. Let's move our drawing over so that it fills more or less from the middle of our page to the left and then click.
Once we've done that go ahead and say ok. Fusion thinks for a moment and places our drawing. Now let's add in a table.
At the top of our drawing menu we see tables and we want to select the table button. We want a parts list and we'll click right here on the right side of our drawing and it places it right away. Pretty cool right? It also associates each bubble with the item on the table.
Now let's double click the table and change its properties. I want to check the box next to part name, uncheck material, and check mass. With that go ahead and click close.
You may have to move this part list around and get it centered on the page. Now let's add information into our title block. Let's double click the title block and for document type let's call it final drawing set.
Enter locks that in. For our drawing number sometimes it's customary to put the first page as zero so we'll try that. Zero, enter, and click finish properties.
So there we go we have our first page all set up.